Drywall Repair in Pullman, WA
Landlords, property managers and homeowners in Pullman use us to patch, prime and schedule. Send photos, get a plan.
- Holes and dents left behind at move-out
- A ceiling stain after a leak or winter thaw
- Cracks, nail pops and bent corner bead
Repairs we handle in Pullman
- 01
Lease turnover repairs
Patch, prime and hand back units on a move-in schedule.
Read more → - 02
Holes, dents and move-out damage
Doorknob holes, furniture gouges and anchor damage, patched flush.
Read more → - 03
Ceiling leaks and water stains
Cut out wet board, replace it, then seal and prime the stain.
Read more → - 04
Cracks, nail pops and corner bead
Settling cracks, popped fasteners and bent corners, repaired and sealed.
Read more → - 05
Texture and finish matching
Orange peel, knockdown or smooth: repairs that blend in.
Read more →
How we work
We are a drywall repair crew serving Pullman, Washington and the Palouse. We start with rentals because that is where Pullman's repair volume is. A property manager needs a unit ready by a date. We work backward from that date.
Every job follows the same sequence. You send photos or a unit list. We reply with a scope and a schedule. We arrive, repair, prime and send a photo report. Homeowners get the same process for a single wall or ceiling.
We keep the language plain and the schedule firm. If a wall needs something beyond drywall, such as a roofer, a plumber or a specialist's check on possible mold, we tell you before we cut.

Request an estimate
Describe the damage and add the number of units if you manage several. Text photos to our number for the fastest scope.
Prefer to text? Text photos to us or call.
Repair now or later
Call now
- Wet, soft or sagging ceiling board
- A hole that exposes wiring or insulation
- Corner bead with sharp or exposed metal
- A unit with a move-in date this week
- A crack that is growing
Can wait for a scheduled visit
- Hairline cracks that have not changed in months
- Small nail pops and pin holes
- A dry, old stain with no soft spot
- Texture mismatch on a wall nobody will inspect soon
From first text to finished wall
- Send photos or a unit listText pictures, or fill in the form with the number of units and dates.
- Scope and scheduleWe reply with what the repair involves and when we can arrive.
- Patch and buildWe cut out damage, fasten new board where needed, tape and apply compound in coats.
- Sand and primeEach patch is sanded flush, wiped clean and primed.
- ReportYou get before and after photos for each room.
Three calls we get often
- 01
A summer turnover with several units
The lease cycle ends and four units empty in the same week. Each has holes, scuffs and a bathroom stain. The next tenants arrive in ten days. We take the unit list, sequence the work so coats dry in one unit while we patch the next, and report each unit as it finishes.
- 02
A doorknob hole at move-out
A door has swung into the wall for a year. The hole is the size of a fist and the paper is torn around it. We cut back to clean board, patch it with backing, build it flush and prime it.
- 03
A winter ceiling stain in a family home
After a stretch of cold weather and a thaw, a brown ring grows on the bedroom ceiling. The roofer finds the source. We cut out the wet board, replace it and finish the ceiling to match.
Myths about drywall repair
Myth. Paint will cover a stain.
Fact. A stain-blocking primer helps on dry, old stains. A soft or sagging ceiling needs replacement board, not paint.
Myth. A crack that is filled stays filled.
Fact. Cracks reopen when the wall moves. Tape spans the weak line and spreads the stress.
Myth. Any patch will do on a textured wall.
Fact. A flat patch on a textured wall shows. Texture matching is a separate step.
Myth. A bigger hole means a bigger bill.
Fact. Size is one factor. Access, texture and moisture often matter more.
What drives the cost of a repair

The cost of a repair depends on six things: size, access, texture, ceiling or wall, moisture and paint. Our guide explains each one with Pullman examples and tells you what to send us for a fast estimate.
Read the cost guideQuestions we hear
Can you repair several units in one visit?
Yes. Send the unit list with move-out and move-in dates. We sequence the work so compound dries in one unit while we patch another, and we report each unit as it is finished.
Do you work with property managers on recurring turnovers?
Yes. Property managers can send each vacancy as it comes, or share the year's expected dates so we can hold slots before the academic-year rush.
How do I get an estimate?
Text photos to our number or fill in the form. Include the room, the size of the damage and whether the surface has texture. We reply with a scope and a date.
Do you paint after the repair?
We prime every patch. Finish paint is usually a separate trade. We coordinate with your painter on timing.
Do you handle mold?
No. We repair drywall. If wet board shows dark spots or a persistent odor, a qualified specialist should check it, and we work around that check.
Do you serve areas outside Pullman?
Yes. We serve Moscow, Idaho and the nearby Palouse towns listed on our coverage page.
Pullman walls, in context
- A rental city.About two-thirds of occupied homes in Pullman are rented. That means turnovers are the daily business of local drywall work, and walls are repaired repeatedly in the same spots.
- A school-year calendar.Washington State University's main campus is in Pullman, so many leases run on the academic year. Vacancies stack up in the same weeks, and repair slots go early.
- Mid-1980s homes.The median house in the city was built in the mid-1980s. Fasteners from that era work loose, and ceilings often carry sprayed texture that has to be matched.
- Cold Palouse winters.Winter here sits near or below freezing for long periods. Snow and thaw cycles push water under roofs, and the first sign is a stain on a ceiling.
- Hillside lots and silty soil.Pullman's neighborhoods climb the hills above the creeks, and Palouse soil is fine wind-blown silt. Seasonal movement shows up as cracks over doors and windows.
- Three creeks.The city was first called Three Forks for the creeks that meet here. Ground near creek beds stays wetter, so basements and lower walls there deserve a moisture check before any drywall repair.
How we run a job
- 01
Written scope first
We confirm what the repair includes before any work starts.
- 02
Thin coats, dry between
We build patches in layers so shrinkage does not leave a dish.
- 03
Primed, not just patched
Every patch is primed so the painter starts on a sealed surface.
- 04
Photo report
Every room gets before and after photos.
- 05
We say what is not ours
Roof, plumbing and mold checks go to the right trade, and we tell you when.
Where we work
- Pullman, WA
- Moscow, Idaho
- Colfax
- Albion
- Colton
- Palouse
- Uniontown
We work in Pullman and the nearby Palouse towns. See the coverage page for each town. See service areas.